起重机套件用快速槽

Quick Trough 模块化槽式系统专为起重机套件、室内起重机和大多数标准起重机主梁而设计。它已在工业应用中经过严格测试，确保持久无故障运行。将电缆有序地收纳并在载体内得到保护 – 避免电缆悬挂，防止缠绕。Quick-Trough 非常适用于气动软管和急弯，并可最小化收回电缆的存放空间（仓库）。

Brochure Contact Us

关键特性

  • 电缆被组织并保护在拖链内，防止缠结（悬挂式电缆是自由下垂/松散/可自由摆动）
  • 节省用于驱动电缆的独立电机的能源、成本和复杂性（电缆由连接至起重机的牵引臂引导）
  • 适用于气管和小弯曲半径
  • 支持电缆拖链的端部安装和中心安装
  • 最小化收回电缆的存储空间（停放区）
  • 与标准导槽相比，安装时间最多可节省80%
  • 减轻重量（比塑料拖链和导槽更轻）
  • 成本低于标准塑料拖链和导槽系统
  • 无干扰 – 无悬挂电缆
  • 适用于堆叠式起重机 – 无悬挂电缆
Two black linear objects with curved, ribbed centers and flat ends are shown. The upper object is positioned horizontally, reminiscent of a crane kit component, while the lower one angles slightly downward. Both have a sleek, industrial design and appear to be metal or plastic.
Key Feature Comparison of Cable Mgmt. TechnologyFestoonStandard Guide Trough with Plastic CarrierQuick Trough with Plastic Carrier
Cables are organized and protected inside a carrier preventing entanglement (Festoon is hanging free / loose / swinging freelyPoorGoodGood
Saves energy, cost, and complexity of separate motor to move
cables (cables guided by tow arm attached to crane)		PoorGoodGood
Works well with pneumatic hoses and tight bendsPoorGoodGood
Supports both end-mount and center mounting of cable carrierPoorGoodGood
Minimize storage space (depot) for retracted cablePoorGoodGood
No interference – No hanging cablesPoorGoodGood
Works with stacked cranes – No hanging cablesPoorGoodBest

技术信息

  • 与 Nylatrac® TSC、KS、KL、NP 和 KLE 系列 塑料电缆拖链 配合使用
  • 最大拖链宽度为 9 英寸
  • 载荷可达 7.44 kg/m.（额外载荷请咨询工厂）
  • 标准快速穿线长度为1.83米.（可提供 0.3-3.05米）
  • 适用于大多数标准起重机主梁
  • 用于墙面和侧面安装的应用
  • 为起重机和工业应用设计并经过测试
Illustration of a long metal beam with multiple supporting brackets, akin to those used in Crane Kits, attached along its length. The beam is segmented, with each section appearing connected. The perspective highlights the design and precise placement of these robust brackets and segments.

安装视频

注意：完整的安装/产品指南可按要求提供，并随订单一起发货。